Independent Editorial · Not Affiliated With Any Studio or Streaming Service · Editorial Policy

What Is a Digital Intermediate in Film Post-Production?

A digital intermediate, or DI, is the stage in film post-production where the finished picture is handled entirely as digital image data so that its colour, contrast and texture can be shaped before the final release versions are made. It sits between the locked edit and distribution: the images are conformed at full quality, graded shot by shot, and then rendered out to whatever formats the film needs. The term dates from the era when the pictures were shot on film, scanned to digital files for this work, and recorded back onto film for printing — the digital part was an *intermediate* step in a photochemical chain. Today almost every production is digital end to end, but the name stuck, and the DI is still where a film's final look is decided.

Table of Contents

What Actually Happens During a DI

The first job is the conform. The editor's timeline, usually cut with low-resolution proxy files for speed, is rebuilt using the original camera files at full resolution, so every shot in the finished film points at its highest-quality source. Visual effects shots, titles and opticals are dropped in as they are delivered. The centre of the process is grading, done by a colourist working with the director and cinematographer in a calibrated theatre.

Modern grading tools work on primaries — overall lift, gamma and gain — and on secondaries, which isolate a colour range, a region of the frame, or a tracked object. A face can be brightened without touching the sky behind it; a wall can shift from green to grey; a day exterior can be pushed towards dusk. Alongside the grade sits a set of smaller image operations that are easier digitally than photochemically: reframing and repositioning shots, stabilisation, speed changes, dust and scratch removal on scanned material, grain management, and sharpening or softening. Shots that need more than that go back to visual effects rather than being fixed in the grade.

Why the DI Replaced Photochemical Timing

Before the DI, a film's look was set by timing the print — adjusting the amount of red, green and blue light used when printing from the negative. That worked on whole shots and only on the three channels together, so a colourist could make a scene warmer or cooler but could not treat the sky separately from the actor standing under it. The DI removed that constraint.

Regional and selective control, frame-accurate changes, and immediate playback of a version turned colour from a corrective step into a creative one. It also let a production see the final look long before release, rather than waiting on lab turnaround for each answer print. The second practical gain was versioning. One graded master can be rendered to theatrical, home video, broadcast and streaming specifications, each with its own brightness range and colour space, without re-timing the film from scratch for each one.

Colour Management, HDR and Why Deliverables Multiply

A DI runs inside a defined colour pipeline. Camera files arrive in the manufacturer's own log encoding or in a raw format; they are transformed into a working space, graded, then transformed again for each output. The Academy Color Encoding System (ACES) is the widely adopted standard framework for this kind of pipeline, and many facilities run their own variations on the same principle. Outputs now commonly include a standard dynamic range version and one or more high dynamic range versions, such as Dolby Vision or HDR10, which carry far greater highlight range than a cinema print.

These are not one grade exported twice. A film graded for a 100-nit reference monitor and one graded for a 1,000-nit HDR display need different decisions about where highlights roll off and how saturated bright colours look, which is why HDR passes are scheduled and budgeted as their own work. Theatrical output is the Digital Cinema Package, or DCP — the encrypted, encoded package a cinema server plays. Laser projection and premium formats each have their own target, and a film mastered for a large-format screen is usually trimmed separately from the standard theatrical version.

Who Owns What, and Where Disputes Happen

Authorship of the look is shared. The cinematographer is normally the author of the photographic intent and the person the colourist works with most closely; the director has final creative say; the colourist contributes technique and judgment and is increasingly credited as a creative collaborator rather than a technician. In practice the three negotiate, and a DI suite is where disagreements about a film's look surface and get settled. Two limits are worth knowing.

First, a grade cannot create information the camera never recorded — crushed shadows and clipped highlights hold no detail to recover, which is why exposure decisions on set constrain everything downstream. Second, a DI cannot rescue a shot with the wrong focus, the wrong lens or the wrong performance; those are reshoots or effects work. The familiar complaint about "orange and teal" grading belongs here too. That look is a choice made in the DI — pushing skin tones warm and shadows cool for separation — not a property of digital cameras. The same tools produce the desaturated, high-contrast look of one film and the soft pastels of another.

Watching for the DI in Films You Already Know

If you want to see what a DI does, compare releases rather than reading about them: Restoration work uses the same toolset for a different purpose. Where a new film's DI establishes a look, a restoration tries to recover one — matching surviving prints and production records, and repairing physical damage, rather than reinventing the image.

  • A film available in both an older transfer and a newer restoration will often differ in overall colour temperature and black level, because the restoration was regraded.
  • A streaming HDR version against the same film's SDR version shows how highlight handling changes: window light and practical lamps carry more range in HDR.
  • A director's-cut or anniversary release sometimes carries a new grade, which is why long-time viewers notice the colour before they notice the edit.
  • Behind-the-scenes material frequently includes ungraded camera footage, which looks flat and low-contrast; that is log material before any DI work, not a mistake.

What a DI Costs in Time

Schedules vary enormously, but the shape is consistent. Conform and preparation take days and depend on how clean the edit's media management was; the main grade on a feature is typically scheduled in weeks, with the director and cinematographer present for part of it; trims for additional formats and the HDR pass follow, then rendering and quality control.

Quality control is the step people forget. Every deliverable gets checked frame by frame for dropped frames, wrong aspect ratios, subtitle and caption placement, and encoding faults — and a fault found there means re-rendering, which is why deliverable deadlines are set well before release dates.

Frequently Asked Questions

Is a digital intermediate the same thing as colour grading?

No. Grading is the largest part of a DI, but the DI also covers the full-resolution conform, reframing, cleanup, mastering and the rendering of every delivery format.

Do films shot on film still get a DI?

Yes, in nearly all cases. The negative is scanned, graded digitally, and output to digital cinema packages, with a film-out recorded back to negative only when a production specifically wants photochemical prints.

Why do streaming and disc versions of a film sometimes look different?

They are rendered from different masters for different display standards, and HDR versions are separately trimmed, so brightness, contrast and saturation decisions legitimately differ between them.


You Might Also Like

We use cookies to run this site, measure how it’s used, and show ads. Choose “Essentials only” to limit cookies to what the site needs to work. Privacy Policy. Cookie Policy.